NAVIGATION SYSTEM (for DVD) Screen Flicker or Color Distortion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DISPLAY SETTING


    1. A0161LCE03

      Enter the display quality adjustment screen.

    2. Reset display settings (contrast, brightness) and check that the screen appears normal.

      OK
      The display returns to normal.

    NG

    CHECK CABIN Click here

    OK

    END

  2. CHECK CABIN


    1. Check that the temperature in the cabin is neither -20°C (-4°F) or lower nor 65°C (149°F) or higher.

      Tech Tips

      The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

      OK
      Temperature in the cabin is between -20°C (-4°F) and 65°C (149°F).

    NG

    SET CABIN TO APPROPRIATE TEMPERATURE

    OK

  3. CHECK COLOR BAR (OPERATION CHECK)


    1. A01625E

      Enter the "Color Bar Check Mode" screen. Refer to Check Color Bar in Operation Check Click here.

    2. Check that the color bars match the displayed names.

      OK
      Color bars match the displayed names.

    NG

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here