INSPECTION PROCEDURE
PROCEDURE
CHECK CELLULAR PHONE
Check if the other caller can hear your voice correctly.
| OK |
|---|
| Your voice can be heard correctly. |
| NG |
|
REPLACE CELLULAR PHONE |
| OK |
|
CHECK SETTINGS
Check if the mute switch is set to on.
| OK |
|---|
| Mute switch is not set to on. |
| NG |
|
TURN MUTE SWITCH OFF |
| OK |
|
CHECK SETTINGS (OPERATION CHECK)
Enter the "Hands-free Volume Setting" screen. Refer to Check Hands-free Volume Setting in Operation Check Click here.
Adjust "Send Voice Level" and check that the other caller can hear your voice.
Tech Tips
Adjusting "Send Voice Level" may deteriorate the sound quality.
The "Send Voice Level" can be set to 10 different levels, -5 to +4.
| OK |
|---|
| Malfunction disappears. |
| NG |
|
CHECK MICROPHONE (OPERATION CHECK) Click here |
| OK |
|
END
CHECK MICROPHONE (OPERATION CHECK)
Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check Click here.
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
Tech Tips
Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
Voice can be recorded up to 5 seconds.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
| OK |
|---|
| All check results are normal. |
| NG |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here |
| OK |
|
REPLACE RADIO RECEIVER ASSEMBLY
Replace the radio receiver assembly Click here.
Check symptoms again.
| OK |
|---|
| The other caller can hear your voice loud enough without noise or distortion. |
| NG |
|
REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here |
| OK |
|
END