NAVIGATION SYSTEM Cursor or Map Rotates when Vehicle Stopped

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK CONDITION


    1. A01633Y

      Check with the customer if the vehicle has been turned by a turntable.

      OK
      Vehicle has not been turned by a turntable.

      Tech Tips

      If the vehicle is turned on a turntable with the engine switch on (ACC or IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back to on (ACC or IG) again with the vehicle completely stopped.


    NG

    TURN ENGINE SWITCH ON (ACC OR IG) WHEN VEHICLE IS COMPLETELY STOPPED

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here