NAVIGATION SYSTEM Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK GPS MARK


    1. A01627TE01

      Check that the GPS mark is displayed.

      OK
      GPS mark is displayed.

    NG

    GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE Click here

    OK

  2. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)


    1. A015YJC

      Enter the "Navigation Check" mode (Vehicle Sensors) Click here.

    2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.

      OK
      The readings are almost equal.

    NG

    GO TO "SPEED SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE Click here

    OK

  3. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)


    1. A0160WRE01

      Check that the display changes between ON and OFF according to the shift lever operation (P and R).

      OK
      Shift Lever Position Display
      P OFF
      R ON

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


    NG

    GO TO "REVERSE SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE Click here

    OK

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Click here