NAVIGATION SYSTEM Screen Flicker or Color Distortion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DISPLAY SETTING


    1. A015YKRE01

      Enter the display adjustment screen by pressing the "DISP" switch.

    2. Reset display settings (contrast, brightness) and check that the screen appears normal.

    3. A0160OIE01

      Press the "INFO" switch and then select "Screen Setting."

    4. A015ZTLE01

      Set the "Switch Color" to "Blue" (initial setting) and check if the display returns to normal.

      OK
      The display returns to normal.

    NG

    CHECK CABIN Click here

    OK

    END

  2. CHECK CABIN


    1. Check that the cabin temperature is warmer than -20°C (-4°F).

      OK
      Cabin is warmer than -20°C (-4°F).

    NG

    HEAT CABIN AND RECHECK TEMPERATURE

    OK

  3. CHECK COLOR BAR (DISPLAY CHECK MODE)


    1. A0162QKE05

      Enter the "Display Check" mode (Color Bar Check) Click here.

    2. Check that the color bars match the displayed names.

      OK
      Color bars match the displayed names.

    NG

    REPLACE MULTI-DISPLAY Click here

    OK

  4. CHECK NAVI COLOR BAR (NAVIGATION CHECK MODE)

    A016278E04

    1. Enter the "Navigation Check" mode (NAVI Color Bar Check) Click here.

    2. Check that the color bars match the displayed names.

      OK
      Color bars match the displayed names.

    NG

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE MULTI-DISPLAY Click here