NAVIGATION SYSTEM Panel Switches do not Function

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK PANEL SWITCH


    1. Check for foreign matter around the switches that might prevent operation.

      OK
      No foreign matter is found.

    NG

    REMOVE ANY FOREIGN MATTER FOUND

    OK

  2. CHECK PANEL SWITCH (DISPLAY CHECK MODE)

    A01634R

    1. Enter the "Display Check" mode (Panel Switch Check) Click here.

    2. Operate the abnormal switch and check if the switch name and status are correctly displayed.

      OK
      The switch name and status are correctly displayed as operated.

    NG

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE MULTI-DISPLAY Click here