NAVIGATION SYSTEM Illumination for Panel Switch does not Come on with Tail Switch ON

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)


    1. A0161ICE01

      Enter the "Display Check" mode (Vehicle Signal Check Mode) Click here.

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Display
      TAIL or ON ON
      OFF OFF

      Tech Tips

      This display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.


    NG

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE MULTI-DISPLAY Click here