DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| 58-10 | Ground short, power supply short, or open circuit in the gyro signal |
|
| 80-10 | Ground short, power supply short, or open circuit in the gyro signal |
INSPECTION PROCEDURE
Tech Tips
After the inspection is completed, clear the DTCs.
PROCEDURE
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
Enter the "Navigation Check" mode (Vehicle Sensors) Click here.
Check the gyro voltage.
| Standard voltage |
|---|
| 0.1 to 4.5 V |
| NG |
|
REPLACE NAVIGATION ECU Click here |
| OK |
|
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
RECHECK FOR DTC
Recheck for DTCs and check if the same trouble occurs again.
Tech Tips
If DTCs are detected frequently, replace the navigation ECU.
| OK |
|---|
| Malfunction disappears. |
| NG |
|
REPLACE NAVIGATION ECU Click here |
| OK |
|
END