AMPLIFIER ANTENNA INSTALLATION


  1. INSTALL AMPLIFIER ANTENNA ASSEMBLY


    1. A0162HH

      Engage the clip as shown in the illustration to temporarily install the amplifier antenna assembly.

      Note


      • Clean the antenna conductors on the rear window with a non-residue solvent where the contact terminals will touch.

      • When installing a new amplifier antenna assembly, do not remove the protective cover until immediately before installation.

      • Do not touch the contact terminals.

    2. A0162PE

      Install the 2 nuts and amplifier antenna assembly.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

    3. Connect the connector.

    4. Engage the clamp.

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here