AMPLIFIER ANTENNA REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Click here.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

    Tech Tips

    Refer to the procedures up to "Remove Roof Headlining Assembly".

  3. REMOVE AMPLIFIER ANTENNA ASSEMBLY


    1. A016265

      Disconnect the connector.

    2. Disengage the clamp and remove the 2 nuts.

    3. Disengage the clip and remove the amplifier antenna assembly.

      Note

      If reusing the removed amplifier antenna assembly, do not touch the contact terminals.