RADIO ANTENNA CORD INSTALLATION

INSTALL ANTENNA CORD SUB-ASSEMBLY
1. Install the antenna cord sub-assembly with the 2 bolts.
  
  Torque:
  
  8.4 N*m { 86 kgf*cm, 74 in.*lbf }
2. Engage the 10 clamps.
3. Connect each connector.
INSTALL ROOF SIDE INNER GARNISH

Tech Tips

Use the same procedure for the RH side and LH side Click here.
INSTALL REAR SEAT SIDE GARNISH

Tech Tips

Use the same procedure for the RH side and LH side Click here.
INSTALL REAR DOOR SCUFF PLATE

Tech Tips

Use the same procedure for the RH side and LH side Click here.
INSTALL REAR SEATBACK ASSEMBLY
1. Place the seatback in the cabin.
  
  Note
  
  Be careful not to damage the vehicle body.
2. Engage the 3 hooks.
3. Install the rear seatback assembly with the 4 bolts.
  
  Torque:
  
  18 N*m { 184 kgf*cm, 13 ft.*lbf }
4. Pass the seat belt through the rear seat shoulder belt guide RH.
5. Engage the 2 claws and close the 2 caps of the rear seat shoulder belt guide RH.
6. Pass the seat belt through the rear seat shoulder belt guide LH.
7. Engage the 2 claws and close the 2 caps of the rear seat shoulder belt guide LH.
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT CUSHION ASSEMBLY
1. Engage the 2 rear hooks of the seat cushion to the child restraint seat anchor bracket.
2. Engage the 2 front hooks of the seat cushion to the vehicle body.
3. Confirm that the seat cushion is firmly installed.
  
  Note
  
  When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.
INSTALL FRONT SEAT ASSEMBLY RH

Tech Tips

Use the same procedure for the RH side and LH side Click here.
INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
1. Engage the clamp and install the No. 2 antenna cord sub-assembly.
INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

Tech Tips

Refer to the procedure from Install Instrument Panel Safety Pad Assembly Click here.