REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
Tech Tips
Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly Click here.
REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
Disengage the clamp and remove the No. 2 antenna cord sub-assembly.
REMOVE FRONT SEAT ASSEMBLY RH
Tech Tips
Use the same procedure for the RH side and LH side Click here.
REMOVE REAR SEAT CUSHION ASSEMBLY
Disengage the 2 front hooks of the rear seat cushion assembly from the vehicle body.
Note
Follow the instructions below carefully as the cushion frame deforms easily.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat for the other hook.
Disengage the 2 rear hooks of the seat cushion from the child restraint seat anchor bracket.
Remove the rear seat cushion assembly.
REMOVE REAR SEAT HEADREST ASSEMBLY
REMOVE REAR SEATBACK ASSEMBLY
Using a screwdriver with the tip tapes, disengage the 2 claws to open the 2 cap of the rear seat shoulder belt guide LH.
Using a screwdriver with the tip tapes, disengage the 2 claws to open the 2 caps of the rear seat shoulder belt guide RH.
Remove the 4 bolts.
Disengage the 3 hooks and remove the rear seatback assembly
REMOVE REAR DOOR SCUFF PLATE
Tech Tips
Use the same procedure for the RH side and LH side Click here.
REMOVE REAR SEAT SIDE GARNISH
Tech Tips
Use the same procedure for the RH side and LH side Click here.
REMOVE ROOF SIDE INNER GARNISH
Tech Tips
Use the same procedure for the RH side and LH side Click here.
REMOVE ANTENNA CORD SUB-ASSEMBLY
Disconnect each connector.
Remove the 2 bolts and disengage the 10 clamps.
Remove the antenna cord sub-assembly.