REAR PACKAGE TRAY SPEAKER ON-VEHICLE INSPECTION


  1. INSPECT STEREO COMPONENT SPEAKER


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.

    3. A01610CE36
      Text in Illustration
      *A w/o Front Center Speaker
      *B w/ Front Center Speaker
      *1

      Component without harness connected

      (Stereo Component Speaker)

      Measure the resistance of the speaker.

      Standard Resistance
      w/o Front Center Speaker
      Tester Connection Condition Specified Condition
      1 (WF1+) - 3 (WF1-) Always 1.6 to 2.4 Ω
      2 (WF2+) - 4 (WF2-) Always 1.6 to 2.4 Ω
      w/ Front Center Speaker
      Tester Connection Condition Specified Condition
      3 (WF1+) - 4 (WF1-) Always 6.2 to 7.8 Ω

      If the result is not as specified, replace the speaker.

  2. INSPECT REAR STEREO COMPONENT SPEAKER (w/ Front Center Speaker)


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.

    3. A0162B1E12
      Text in Illustration
      *1

      Component without harness connected

      (Rear Stereo Component Speaker)

      Measure the resistance of the speaker.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 4.8 to 6.4 Ω

      If the result is not as specified, replace the speaker.