REAR DOOR SPEAKER INSTALLATION


  1. INSTALL REAR SPEAKER ASSEMBLY


    1. A01617O

      Engage the 2 claws as shown in the illustration to temporarily install the rear speaker assembly.

    2. A0161NOE01

      Install the rear speaker assembly with the 3 bolts.

      Tech Tips

      Install the bolts in the order shown in the illustration.

    3. Connect the connector.

  2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY


    1. A016082

      Engage the 3 claws and install the rear No. 2 speaker assembly.

    2. Engage the speaker connector clamp.

  3. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (w/o Front Center Speaker)


    1. A0160N2E01

      Install the rear No. 3 speaker assembly with the 2 bolts.

      Tech Tips

      Install the bolts in the order shown in the illustration.

    2. Connect the connector.

  4. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP


    1. A0161ZA

      Engage the 3 claws to install the rear door inner glass weatherstrip.

  5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Install the 2 rear door trim board retainers (green).

    2. A016170

      Connect the rear door lock remote control cable and rear door inside locking cable to the rear inside handle.

    3. Connect each connector.

    4. A0162P8

      Engage the rear door trim board with the 3 clips of the rear door inner glass weatherstrip.

    5. A015ZS2

      Engage the 8 clips to install the rear door trim board to the rear door panel.

    6. Install the 2 screws.

  6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. A015Z2B

      Engage the 2 claws and 2 clips, and install the rear power window regulator switch assembly with rear door armrest base panel.

  7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG


    1. A0162FH

      Engage the 3 claws to install the rear door inside handle bezel plug.