FRONT DOOR SPEAKER ON-VEHICLE INSPECTION


  1. INSPECT FRONT NO. 1 SPEAKER

    Tech Tips

    Remove interior parts so that the front No. 1 speaker can be seen.


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

      If the result is not as specified, reinstall the front No. 1 speaker.

    2. Visually check the speaker.

      OK
      The cone paper of the speaker is not torn.

      If the result is not as specified, replace the front No. 1 speaker.

    3. A0161OXE07

      Speaker resistance check


      1. Disconnect the front No. 1 speaker connector.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        w/o Front Center Speaker
        Tester Connection Condition Specified Condition
        1 - 2 Always 3.2 to 4.8 Ω
        w/ Front Center Speaker
        Tester Connection Condition Specified Condition
        1 - 2 Always 6 to 10 Ω

        If the result is not as specified, replace the front No. 1 speaker.

  2. INSPECT FRONT NO. 2 SPEAKER

    Tech Tips

    Remove interior parts so that the front No. 2 speaker can be seen.


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

      If the result is not as specified, reinstall the front No. 2 speaker.

    2. Visually check the speaker.

      OK
      The cone paper of the speaker is not torn.

      If the result is not as specified, replace the front No. 2 speaker.

  3. INSPECT FRONT NO. 3 SPEAKER

    Tech Tips

    Remove interior parts so that the front No. 3 speaker can be seen.


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

      If the result is not as specified, reinstall the front No. 3 speaker.

    2. Visually check the speaker.

      OK
      The cone paper of the speaker is not torn.

      If the result is not as specified, replace the front No. 3 speaker.