INSPECT REAR SPEAKER (w/ Front Center Speaker)
Tech Tips
Remove interior parts so that the rear speaker can be seen.
Check the speaker installation.
| OK |
|---|
| The speaker is securely installed. |
If the result is not as specified, reinstall the rear speaker.
Visually check the speaker.
| OK |
|---|
| The cone paper of the speaker is not torn. |
If the result is not as specified, replace the rear speaker.
INSPECT REAR SPEAKER (w/o Front Center Speaker)
Tech Tips
Remove interior parts so that the rear speaker can be seen.
Check the speaker installation.
| OK |
|---|
| The speaker is securely installed. |
If the result is not as specified, reinstall the rear speaker.
Visually check the speaker.
| OK |
|---|
| The cone paper of the speaker is not torn. |
If the result is not as specified, replace the rear speaker.
Speaker resistance check
Disconnect the rear speaker connector.
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | ||||||
|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the rear speaker.
INSPECT REAR NO. 2 SPEAKER
Tech Tips
Remove interior parts so that the rear No. 2 speaker can be seen.
Check the speaker installation.
| OK |
|---|
| The speaker is securely installed. |
If the result is not as specified, reinstall the rear No. 2 speaker.
Visually check the speaker.
| OK |
|---|
| The cone paper of the speaker is not torn. |
If the result is not as specified, replace the rear No. 2 speaker.
INSPECT REAR NO. 3 SPEAKER (w/o Front Center Speaker)
Tech Tips
Remove interior parts so that the rear No. 3 speaker can be seen.
Check the speaker installation.
| OK |
|---|
| The speaker is securely installed. |
If the result is not as specified, reinstall the rear No. 3 speaker.
Visually check the speaker.
| OK |
|---|
| The cone paper of the speaker is not torn. |
If the result is not as specified, replace the rear No. 3 speaker.