HARD DISK DRIVE INSTALLATION


  1. INSTALL HARD DISK DRIVE


    1. A015ZEU

      Install the hard disk drive as shown in the illustration.

    2. Install the screw.

  2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY


    1. Connect each connector.

    2. Install the display and navigation module display with radio receiver assembly with the 4 bolts.

  3. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160J3

      Engage the 4 claws to install the center lower instrument cluster finish panel.

  4. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A015Z29

      for LHD:


      1. Connect the connector.

    2. A0160I2

      for RHD:


      1. Connect the connector.

      2. Engage the 3 clamps.

    3. A0162RW

      Engage the 11 claws to install the No. 3 instrument panel register assembly.

  5. INSTALL FRONT ASH RECEPTACLE ASSEMBLY


    1. A0161X0E01

      Connect the connectors.

    2. Insert the protruding parts of the front ash receptacle assembly into the 2 guide holes as shown in the illustration.

    3. A0161L2

      Install the front ash receptacle assembly with the 2 screws <E>.

  6. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. A0162AI

      Connect the connectors.

    2. Engage the 8 clips to install the console panel sub-assembly.

  7. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A0163A0

      Engage the claw and 2 clips to install the upper No. 2 console panel garnish as shown in the illustration.

  8. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A01626T

      Engage the claw and 2 clips to install the upper No. 1 console panel garnish as shown in the illustration.

  9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A015ZOR

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  11. ADJUST CLOCK

  12. INSPECT HARD DISK DRIVE

    Click here