NAVIGATION ECU INSTALLATION


  1. INSTALL NAVIGATION ECU


    1. A0161TG

      Install the navigation ECU with the 4 screws.

    2. A0162FK

      Connect the connectors.

  2. INSTALL MULTI-DISPLAY ASSEMBLY


    1. A0163B0

      Install the multi-display assembly as shown in the illustration.

  3. INSTALL NO. 2 RADIO BRACKET


    1. A015Z6H

      Install the No. 2 radio bracket with the 7 bolts.

  4. INSTALL NO. 1 RADIO BRACKET


    1. A0160LX

      Install the No. 1 radio bracket with the 7 bolts.

    2. A015YV5

      Engage the connector clamp.

  5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY


    1. Connect each connector.

    2. A0162FS

      Install the the multi-display with radio receiver assembly with the 4 bolts.

  6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A0160J3

      Engage the 4 claws to install the center lower instrument cluster finish panel.

  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A015Z29

      for LHD:


      1. Connect the connectors.

    2. A0160I2

      for RHD:


      1. Connect the connectors.

      2. Engage the 3 clamps.

    3. A0162RW

      Engage the 11 claws to install the No. 3 instrument panel register assembly.

  8. INSTALL FRONT ASH RECEPTACLE ASSEMBLY


    1. A0161X0E01

      Connect the connectors.

    2. Insert the protruding parts of the front ash receptacle assembly into the 2 guide holes as shown in the illustration.

    3. A0161L2

      Install the front ash receptacle assembly with the 2 screws <E>.

  9. INSTALL CONSOLE PANEL SUB-ASSEMBLY


    1. A0162AI

      Connect the connectors.

    2. Engage the 8 clips to install the console panel sub-assembly.

  10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A0163A0

      Engage the claw and 2 clips to install the upper No. 2 console panel garnish.

  11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A01626T

      Engage the claw and 2 clips to install the upper No. 1 console panel garnish.

  12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A015ZOR

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  13. INSERT MAP DISC


    1. A0160QD

      Remove the clock assembly.

    2. Turn the engine switch on (ACC).

    3. Insert the map disc.

    4. A01624XE01

      Check that the wire harness is in the position shown in the illustration.

    5. A0162SY

      Engage the 2 clamps and install the clock assembly.

  14. ADJUST CLOCK