СИСТЕМА ЗАРЯДКИ ДВИГАТЕЛЯ В процессе работы двигателя из генератора издается шум

INSPECTION PROCEDURE

PROCEDURE

1. CHECK LOOSENESS OF V-RIBBED BELT

   
   

   1. Check the tension of the belt by pushing it down with a finger.

      OK
      The tension of the belt is enough.

   
   

   NG :REPLACE V-RIBBED BELT TENSIONER ASSEMBLY

   REPLACE V-RIBBED BELT TENSIONER ASSEMBLY

   OK :

2. CHECK V-RIBBED BELT FOR WEAR

   
   

   1. Check the V-ribbed belt for wear.

      OK
      The V-ribbed belt is not worn.

   
   

   NG :REPLACE V-RIBBED BELT

   REPLACE V-RIBBED BELT

   OK :

3. CHECK CLUTCH PULLEY FOR WEAR

   
   

   1. Check the clutch pulley grooves for wear or other defects.

      OK
      The clutch pulley grooves are not damaged.

   
   

   NG :REPLACE CLUTCH PULLEY

   REPLACE CLUTCH PULLEY

   OK :

4. CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING

   
   

   1. Perform a driving test and check if noise occurs when decelerating.

      OK
      Noise does not occur.

   
   

   NG :REPLACE CLUTCH PULLEY

   REPLACE CLUTCH PULLEY

   OK :REPLACE GENERATOR ASSEMBLY

   REPLACE GENERATOR ASSEMBLY