Click here

SLIDING ROOF HOUSING DISASSEMBLY

Click here
Click here
  1. Click here

    REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY


    1. A017FOS

      Remove the 2 bolts and sliding roof drive gear sub-assembly.

  2. Click here

    REMOVE SUNSHADE TRIM SUB-ASSEMBLY


    1. A017E7H

      Remove the screw and sliding roof piece sub-assembly LH.

      Tip:

      Use the same procedure for the RH side and the LH side.

    2. A017CZ9

      Slide and remove the sunshade trim sub-assembly.

  3. Click here

    REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

    Note:

    Disassemble the sliding roof drive cable sub-assembly only when replacing it.


    1. A017F19

      Remove the screw and sliding roof side stopper.

      Tip:

      Use the same procedure for the RH side and the LH side.

    2. A017BI5E01

      Using a screwdriver, disengage the 2 claws. Then slide the sliding roof drip channel rearward to remove it.

      Tip:

      Tape the screwdriver tip before use.

    3. A017EULE01

      Using a screwdriver, slide the sliding roof drive cable sub-assembly in the direction indicated by the arrow in the illustration to remove it.