REMOVE BOX BOTTOM MAT
Remove the box bottom mat.
REMOVE CONSOLE COMPARTMENT DOOR CUSHION
for Console Compartment Door:
Remove the 2 console compartment door cushions from the console compartment door.
for Rear Console Box Assembly:
Remove the 2 console compartment door cushions from the rear console box assembly.
REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY (w/o Rear Air Conditioning System)
Remove the 14 screws and the console compartment box assembly.
REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY (w/ Rear Air Conditioning System)
Remove the 14 screws.
Disengage the clamp and remove the console compartment box assembly.
REMOVE REAR CONSOLE BOX WIRE (w/ Rear Air Conditioning System)
Disengage the 2 clamps and remove the rear console box wire.
REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (w/o Rear Air Conditioning System)
Disengage the 6 clips and remove the console rear end panel sub-assembly.
REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (w/ Rear Air Conditioning System)
Disengage the 6 clips and remove the console rear end panel sub-assembly.
REMOVE REAR AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)
Disengage the 8 claws and 2 clips, and remove the rear air conditioning control assembly.
Disconnect the connector.
REMOVE REAR AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
Disengage the 8 claws and 2 clips, and remove the rear air conditioning control assembly.
Disconnect the connector.
REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 4 screws and the console compartment door sub-assembly.
REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 2 screws and the console compartment door lock sub-assembly.
REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Remove the 4 screws.
Disengage the 3 claws and remove the outer console compartment door.
Remove the 4 screws and console compartment door hinge sub-assembly.
REMOVE REAR CONSOLE BOX CUP HOLDER
Remove the 3 screws.
Remove the console box cup holder from the console rear end panel as shown in the illustration.
REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Rear Air Conditioning System)
Using a screwdriver, disengage the 8 claws and remove the console box register assembly from the console rear end panel as shown in the illustration.
Tech Tips
Tape the screwdriver tip before use.