SLIDING ROOF SWITCH ASSEMBLY ON-VEHICLE INSPECTION


  1. INSPECT ROOF CONSOLE BOX ASSEMBLY


    1. A017ER5E02

      Remove the roof console box assembly.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      Q1-3 (CLS) - Q1-2 (GND) CLOSE Below 100 Ω
      Q1-4 (OPN) - Q1-2 (GND) OPEN Below 100 Ω
      Q1-5 (DOWN) - Q1-2 (GND) DOWN Below 100 Ω
      Q1-6 (UP) - Q1-2 (GND) UP Below 100 Ω
      Q1-3 (CLS) - Q1-2 (GND) OPEN 1 kΩ or higher
      Q1-4 (OPN) - Q1-2 (GND) CLOSE 1 kΩ or higher
      Q1-5 (DOWN) - Q1-2 (GND) UP 1 kΩ or higher
      Q1-6 (UP) - Q1-2 (GND) DOWN 1 kΩ or higher

      If the result is not as specified, replace the roof console box assembly.