FENDER LINER (for Rear Side) INSTALLATION


  1. INSTALL REAR WHEEL HOUSE LINER LH


    1. A017CA9

      Install the rear wheel house liner LH with the 10 clips.

  2. INSTALL REAR WHEEL HOUSE LINER RH


    1. A017B08

      Install the rear wheel house liner RH with the 10 clips.

  3. INSTALL REAR BUMPER SIDE SEAL LH


    1. A017B5W

      Install 2 new grommets.

    2. Install the rear bumper side seal LH with the clip, bolt and screw.

  4. INSTALL REAR BUMPER SIDE SEAL RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  5. INSTALL QUARTER PANEL SEAL LH

    Tech Tips

    When installing a new quarter panel seal LH, heat the vehicle body and quarter panel seal LH using a heat light.

    Heating temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Quarter Panel Seal 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and quarter panel seal LH excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A017BJAE01

      Install a new quarter panel seal LH.


      1. Using a heat light, heat the vehicle body and a new quarter panel seal LH.

      2. Remove the release paper from the quarter panel seal LH.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the quarter panel seal LH with the 4 screws.

  6. INSTALL QUARTER PANEL SEAL RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  7. INSTALL REAR WHEEL HOUSE PAD LH


    1. A017EDD

      Install the rear wheel house pad LH with the 3 screws.

  8. INSTALL REAR WHEEL HOUSE PAD RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  9. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Rear Fender Mudguard)


    1. A017G26E01

      Install the screw (A).

    2. Using a 4 mm hexagon wrench, install the 6 screws (B).

  10. INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Rear Fender Mudguard)

    Tech Tips

    Use the same procedures for the RH side and LH side.