Click here

FENDER LINER (for Rear Side) REMOVAL

Click here
Click here
  1. Click here

    REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Rear Fender Mudguard)


    1. A017G26E01

      Remove the screw (A).

    2. Using a 4 mm hexagon wrench, remove the 6 screws (B).

  2. Click here

    REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Rear Fender Mudguard)

    Tip:

    Use the same procedures for the RH side and LH side.

  3. Click here

    REMOVE REAR WHEEL HOUSE PAD LH


    1. A017EDD

      Remove the 3 screws and rear wheel house pad LH.

  4. Click here

    REMOVE REAR WHEEL HOUSE PAD RH

    Tip:

    Use the same procedure for the RH side and LH side.

  5. Click here

    REMOVE QUARTER PANEL SEAL LH


    1. A017BJAE01

      Remove the 4 screws.

    2. Peel off the double-sided tape and remove the quarter panel seal LH.

  6. Click here

    REMOVE QUARTER PANEL SEAL RH

    Tip:

    Use the same procedures for the RH side and LH side.

  7. Click here

    REMOVE REAR BUMPER SIDE SEAL LH


    1. A017B5W

      Remove the clip, screw and bolt.

    2. Remove the 2 grommets.

      Tip:

      The grommets need to be replaced with new ones because they will break when they are removed.

    3. Remove the rear bumper side seal LH.

  8. Click here

    REMOVE REAR BUMPER SIDE SEAL RH

    Tip:

    Use the same procedures for the RH side and LH side.

  9. Click here

    REMOVE REAR WHEEL HOUSE LINER LH


    1. A017CA9

      Remove the 10 clips and rear wheel house liner LH.

  10. Click here

    REMOVE REAR WHEEL HOUSE LINER RH


    1. A017B08

      Remove the 10 clips and rear wheel house liner RH.