Click here

FENDER LINER (for Front Side) REMOVAL

Click here
Click here
  1. Click here

    REMOVE ENGINE UNDER COVER ASSEMBLY


    1. A017FPR

      Remove the 2 bolts and engine under cover assembly RR.

    2. A017FXN

      Remove the 2 bolts, 2 screws, 5 clips and engine under cover assembly.

  2. Click here

    REMOVE NO. 1 ENGINE UNDER COVER


    1. A017B8T

      Remove the 6 bolts, 2 clips and No. 1 engine under cover.

  3. Click here

    REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH


    1. A017F6U

      Remove the clip.

    2. Using a 4 mm hexagon wrench, remove the screw.

    3. A017C5R

      Peel off the front fender side protector and disengage the 3 clips, and then remove the front fender moulding sub-assembly.

    4. Remove the pad from the front fender moulding sub-assembly.

    5. Remove the 2 No. 4 clips from the front fender moulding sub-assembly.

    6. A017BKRE01

      Remove the front fender side protector from the front fender moulding sub-assembly.

  4. Click here

    REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH

    Tip:

    Use the same procedures for the RH side and LH side.

  5. Click here

    REMOVE FRONT WHEEL OPENING EXTENSION PAD (for LH Side)


    1. A017E3C

      Remove the 2 screws and front wheel opening extension pad.

  6. Click here

    REMOVE FRONT WHEEL OPENING EXTENSION PAD (for RH Side)

    Tip:

    Use the same procedure for the RH side and LH side.

  7. Click here

    REMOVE FRONT FENDER LINER LH


    1. A017ERME01

      Remove the screw.

    2. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    3. A017F68

      Using a 4 mm hexagon wrench, remove the 2 screws.

    4. Remove the 2 grommets.

      Tip:

      The grommets need to be replaced with new ones because they will break when they are removed.

    5. A017CTK

      Remove the 5 clips, 8 screws and front fender liner LH.

  8. Click here

    REMOVE FRONT FENDER LINER RH


    1. A017FSUE01

      Remove the screw.

    2. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    3. A017EB7

      Using a 4 mm hexagon wrench, remove the 2 screws.

    4. Remove the 2 grommets.

      Tip:

      The grommets need to be replaced with new ones because they will break when they are removed.

    5. A017B8K

      Remove the 5 clips, 7 screws and front fender liner RH.