FENDER LINER (for Front Side) REMOVAL


  1. REMOVE ENGINE UNDER COVER ASSEMBLY


    1. A017FPR

      Remove the 2 bolts and engine under cover assembly RR.

    2. A017FXN

      Remove the 2 bolts, 2 screws, 5 clips and engine under cover assembly.

  2. REMOVE NO. 1 ENGINE UNDER COVER


    1. A017B8T

      Remove the 6 bolts, 2 clips and No. 1 engine under cover.

  3. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH


    1. A017F6U

      Remove the clip.

    2. Using a 4 mm hexagon wrench, remove the screw.

    3. A017C5R

      Peel off the front fender side protector and disengage the 3 clips, and then remove the front fender moulding sub-assembly.

    4. Remove the pad from the front fender moulding sub-assembly.

    5. Remove the 2 No. 4 clips from the front fender moulding sub-assembly.

    6. A017BKRE01

      Remove the front fender side protector from the front fender moulding sub-assembly.

  4. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  5. REMOVE FRONT WHEEL OPENING EXTENSION PAD (for LH Side)


    1. A017E3C

      Remove the 2 screws and front wheel opening extension pad.

  6. REMOVE FRONT WHEEL OPENING EXTENSION PAD (for RH Side)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  7. REMOVE FRONT FENDER LINER LH


    1. A017ERME01

      Remove the screw.

    2. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    3. A017F68

      Using a 4 mm hexagon wrench, remove the 2 screws.

    4. Remove the 2 grommets.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

    5. A017CTK

      Remove the 5 clips, 8 screws and front fender liner LH.

  8. REMOVE FRONT FENDER LINER RH


    1. A017FSUE01

      Remove the screw.

    2. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    3. A017EB7

      Using a 4 mm hexagon wrench, remove the 2 screws.

    4. Remove the 2 grommets.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

    5. A017B8K

      Remove the 5 clips, 7 screws and front fender liner RH.