SIDE MUDGUARD INSTALLATION

Tech Tips

When installing the side mudguard, heat the vehicle body and side mudguard using a heat light.

Heating temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Side Mudguard 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body or side mudguard excessively.


  1. INSTALL REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the upper rear door outside moulding pad from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A017BC5E01

      Clean the rear door outside moulding sub-assembly. (If reusing the rear door outside moulding sub-assembly)


      1. Using a heat light, heat the rear door outside moulding sub-assembly.

      2. Remove the upper rear door outside moulding pad from the rear door outside moulding sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Install a new upper rear door outside moulding pad to the rear door outside moulding sub-assembly.

    3. Install 2 new No. 3 clips on the rear door outside moulding sub-assembly.

    4. Install 6 new No. 4 clips on the rear door outside moulding sub-assembly.

    5. Install a new gasket on the rear door outside moulding sub-assembly.

    6. A017FXVE01

      Install the rear door outside moulding sub-assembly.


      1. Using a heat light, heat the vehicle body and rear door outside moulding sub-assembly.

      2. Remove the release paper from the rear door outside moulding sub-assembly.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 8 clips and install the rear door outside moulding sub-assembly.

    7. A017EO5

      Install the nut.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    8. Install the rear door No. 2 weatherstrip.

  2. INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the upper front door outside moulding pad from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A017D9NE01

      Clean the front door outside moulding sub-assembly. (If reusing the front door outside moulding sub-assembly)


      1. Using a heat light, heat the front door outside moulding sub-assembly.

      2. Remove the upper front door outside moulding pad from the front door outside moulding sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Install a new upper front door outside moulding pad to the front door outside moulding sub-assembly.

    3. Install 3 new No. 3 clips on the front door outside moulding sub-assembly.

    4. Install 8 new No. 4 clips on the front door outside moulding sub-assembly.

    5. Install a new gasket on the front door outside moulding sub-assembly.

    6. A017FQWE01

      Install the front door outside moulding sub-assembly.


      1. Using a heat light, heat the vehicle body and front door outside moulding sub-assembly.

      2. Remove the release paper from the front door outside moulding sub-assembly.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 11 clips and install the front door outside moulding sub-assembly.

    7. A017BQY

      Install the nut.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    8. Install the front door weatherstrip.

  3. INSTALL FRONT FENDER OUTSIDE MOULDING PAD


    1. A017EW2E01

      Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from the front fender outside moulding pad.

    3. Install a new front fender outside moulding pad to the front fender moulding sub-assembly.

  4. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the front fender side protector from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A017BKRE01

      Clean the front fender moulding sub-assembly. (If reusing the front fender moulding sub-assembly)


      1. Using a heat light, heat the front fender moulding sub-assembly.

      2. Remove the front fender side protector from the front fender moulding sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Install a new front fender side protector to the the front fender moulding sub-assembly.

    3. Install 2 new No. 4 clips on the front fender moulding sub-assembly.

    4. Install a new pad on the front fender moulding sub-assembly.

    5. A017C5R

      Install the front fender moulding sub-assembly.


      1. Using a heat light, heat the vehicle body and the front fender moulding sub-assembly.

      2. Remove the release paper from the front fender moulding sub-assembly.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 3 clips and install the front fender moulding sub-assembly.

    6. A017F6U

      Using a 4 mm hexagon wrench, install the screw.

    7. Install the clip.