Click here

SIDE MUDGUARD REMOVAL

Click here
Click here
Tip:

When removing the side mudguard, heat the vehicle body and side mudguard using a heat light.

Heating temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Side Mudguard 20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body or side mudguard excessively.

Click here
  1. Click here

    REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY


    1. A017F6U

      Remove the clip.

    2. Using a 4 mm hexagon wrench, remove the screw.

    3. A017C5R

      Peel off the front fender side protector and disengage the 3 clips, and then remove the front fender moulding sub-assembly.

    4. Remove the pad from the front fender moulding sub-assembly.

    5. Remove the 2 No. 4 clips from the front fender moulding sub-assembly.

    6. A017BKRE01

      Remove the front fender side protector from the front fender moulding sub-assembly.

  2. Click here

    REMOVE FRONT FENDER OUTSIDE MOULDING PAD


    1. A017EW2E01

      Remove the front fender outside moulding pad from the front fender moulding sub-assembly.

  3. Click here

    REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY


    1. A017BQY

      Turn back the front door weatherstrip.

    2. Remove the nut.

    3. A017FQWE01

      Peel off the upper front door outside moulding pad and disengage the 11 clips, and then remove the front door outside moulding sub-assembly.

    4. Remove the gasket from the front door outside moulding sub-assembly.

    5. Remove the 3 No. 3 clips pad from the front door outside moulding sub-assembly.

    6. Remove the 8 No. 4 clips pad from the front door outside moulding sub-assembly.

    7. A017D9NE01

      Remove the upper front door outside moulding pad from the front door outside moulding sub-assembly.

  4. Click here

    REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY


    1. A017EO5

      Turn back the rear door No. 2 weatherstrip.

    2. Remove the nut.

    3. A017FXVE01

      Peel off the upper rear door outside moulding pad and disengage the 8 clips, and then remove the rear door outside moulding sub-assembly.

    4. Remove the gasket from the rear door outside moulding sub-assembly.

    5. Remove the 2 No. 3 clips pad from the rear door outside moulding sub-assembly.

    6. Remove the 6 No. 4 clips pad from the rear door outside moulding sub-assembly.

    7. A017BC5E01

      Remove the upper rear door outside moulding pad from the rear door outside moulding sub-assembly.