Click here

ROOF DRIP SIDE FINISH MOULDING INSTALLATION

Click here
Click here
  1. Click here

    INSTALL CENTER ROOF RACK BRACKET (w/o Roof Rack)


    1. A017D6FE01

      Install a new center roof rack bracket with 2 new bolts as shown in the illustration.

      10 N*m 102 kgf*cm 7.4 ft.*lbf
      Tip:

      Use the same procedure for the rear side and front side.

  2. Click here

    INSTALL ROOF DRIP SIDE FINISH MOULDING (for Front Side)


    1. A017FTKE01

      Engage the clip and install the roof drip side finish moulding as shown in the illustration.

  3. Click here

    INSTALL ROOF DRIP SIDE FINISH MOULDING (for Rear Side)


    1. A017FP5E01

      Engage the clip and install the roof drip side finish moulding as shown in the illustration.

  4. Click here

    INSTALL CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A017EOXE01

      Position the center roof drip side finish moulding by aligning it with the matchmark on the vehicle body as shown in the illustration.

    2. Install the center roof drip side finish moulding.

  5. Click here

    INSTALL ROOF DRIP SIDE FINISH MOULDING JOINT COVER (w/o Roof Rack)


    1. A017BTFE01

      Engage the claw and clip, and install the roof drip side finish moulding joint cover as shown in the illustration.

      Tip:

      Use the same procedure for the rear side and front side.

  6. Click here

    INSTALL ROOF RACK ASSEMBLY (w/ Roof Rack)


    1. A017C23E01

      Install 4 new gaskets.

    2. A017BTK

      Install the roof rack assembly with 4 new bolts.

      32 N*m 326 kgf*cm 24 ft.*lbf
  7. Click here

    INSTALL FRONT ROOF RACK LEG COVER (w/ Roof Rack)


    1. A017C7T

      Engage the guide and 4 claws, and install the front roof rack leg cover.

  8. Click here

    INSTALL REAR ROOF RACK LEG COVER (w/ Roof Rack)


    1. A017G9X

      Engage the guide and 4 claws, and install the rear roof rack leg cover.