ROOF DRIP SIDE FINISH MOULDING REMOVAL


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER (w/o Roof Rack)


    1. A017FZGE01

      Disengage the clip and claw, and remove the roof drip side finish moulding joint cover as shown in the illustration.

      Tech Tips

      Use the same procedure for the rear side and front side.

  2. REMOVE FRONT ROOF RACK LEG COVER (w/ Roof Rack)


    1. A017CIOE01

      Put protective tape around the front roof rack leg cover.

    2. Using a moulding remover, disengage the 4 claws.

      Note

      Be careful not to damage the claws.

    3. Disengage the guide and remove the front roof rack leg cover.

      A017D1P

  3. REMOVE REAR ROOF RACK LEG COVER (w/ Roof Rack)


    1. A017FF9E01

      Put protective tape around the rear roof rack leg cover.

    2. Using a moulding remover, disengage the 4 claws.

      Note

      Be careful not to damage the claws.

    3. Disengage the guide and remove the rear roof rack leg cover.

      A017G1H

  4. REMOVE ROOF RACK ASSEMBLY (w/ Roof Rack)


    1. Remove the 4 bolts and roof rack assembly.

      A017BTK
    2. A017C23E01

      Remove the 4 gaskets.

  5. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A017EOXE01

      Place a matchmark on the vehicle body on the location indicated in the illustration.

    2. Remove the center roof drip side finish moulding.

  6. REMOVE ROOF DRIP SIDE FINISH MOULDING (for Front Side)


    1. A017C95

      Disengage the clip and remove the roof drip side finish moulding.

  7. REMOVE ROOF DRIP SIDE FINISH MOULDING (for Rear Side)


    1. A017BRH

      Disengage the clip and remove the roof drip side finish moulding.

  8. REMOVE CENTER ROOF RACK BRACKET (w/o Roof Rack)


    1. A017CLZ

      Remove the 2 bolts and center roof rack bracket.

      Tech Tips

      Use the same procedure for the rear side and front side.