Click here

REAR BUMPER REASSEMBLY

Click here
Click here
  1. Click here

    INSTALL NO. 1 REAR BUMPER SIDE SUPPORT


    1. A017F6T

      Engage the 2 claws and install a new No. 1 rear bumper side support.

      Tip:

      Use the same procedure for the RH side and LH side.

  2. Click here

    INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. A017B14

      Engage the 3 claws and install a new No. 2 rear bumper side support LH.

    2. Install the 2 screws.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  3. Click here

    INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

    Tip:

    Use the same procedures for the RH side and LH side.

  4. Click here

    INSTALL REAR BUMPER SIDE RETAINER LH


    1. A017FLG

      Engage the 2 claws and install a new rear bumper side retainer LH.

    2. Install the screw.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  5. Click here

    INSTALL REAR BUMPER SIDE RETAINER RH

    Tip:

    Use the same procedures for the RH side and LH side.

  6. Click here

    INSTALL REAR BUMPER REINFORCEMENT


    1. A017EC0

      Install the rear bumper reinforcement with the 6 nuts.

      64 N*m 653 kgf*cm 47 ft.*lbf
  7. Click here

    INSTALL REAR BUMPER PLATE LH


    1. A017BBL

      Engage the 3 claws and install the rear bumper plate LH.

  8. Click here

    INSTALL REAR BUMPER PLATE RH

    Tip:

    Use the same procedure for the RH side and LH side.

  9. Click here

    INSTALL REAR BUMPER BAR


    1. A017BN1

      Install the rear bumper bar on the rear bumper energy absorber.

  10. Click here

    INSTALL REAR BUMPER ENERGY ABSORBER


    1. A017ET3

      Engage the 2 guides, and install the rear bumper energy absorber.

  11. Click here

    INSTALL LOWER REAR BUMPER COVER


    1. Engage the 10 claws and install the lower rear bumper cover.

    2. A017BT5

      Install the 2 clips.

  12. Click here

    INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. A017F9J

      Install the reflex reflector assembly LH with the nut.

  13. Click here

    INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tip:

    Use the same procedure for the RH side and LH side.

  14. Click here

    INSTALL REAR FOG LIGHT ASSEMBLY (w/ Rear Fog Light)


    1. A017G40

      Install the rear fog light assembly.

  15. Click here

    INSTALL REAR FOG LIGHT BRACKET (w/ Rear Fog Light)


    1. A017BKO

      Engage the 4 claws and install the rear fog light bracket.

    2. A017CNZ

      Engage the clamp.

    3. A017F9W

      Tighten the 2 screws.