REAR BUMPER DISASSEMBLY


  1. REMOVE REAR FOG LIGHT BRACKET (w/ Rear Fog Light)


    1. A017FBW

      Loosen the 2 screws as shown in the illustration.

    2. A017CNZ

      Disengage the clamp.

    3. A017BKO

      Disengage the 4 claws and remove the rear fog light bracket.

  2. REMOVE REAR FOG LIGHT ASSEMBLY (w/ Rear Fog Light)


    1. A017DS3

      Remove the rear fog light assembly.

  3. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. A017F9J

      Remove the nut and reflex reflector assembly LH.

  4. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. REMOVE LOWER REAR BUMPER COVER


    1. Remove the 2 clips.

    2. Disengage the 10 claws and 2 guides, and remove the lower rear bumper cover.

      A017BT5

  6. REMOVE REAR BUMPER ENERGY ABSORBER


    1. A017ET3

      Disengage the 2 guides and remove the rear bumper energy absorber.

  7. REMOVE REAR BUMPER BAR


    1. A017BN1

      Remove the rear bumper bar from the rear bumper energy absorber.

  8. REMOVE REAR BUMPER PLATE LH


    1. A017BBL

      Disengage the 3 claws and remove the rear bumper plate LH.

  9. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  10. REMOVE REAR BUMPER REINFORCEMENT


    1. A017EC0

      Remove the 6 nuts and rear bumper reinforcement.

  11. REMOVE REAR BUMPER SIDE RETAINER LH


    1. A017FLG

      Remove the screw.

    2. Disengage the 2 claws and remove the rear bumper side retainer LH.

  12. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  13. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. A017B14

      Remove the 2 screws.

    2. Disengage the 3 claws and remove the No. 2 rear bumper side support LH.

  14. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedures for the RH side and LH side.

  15. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT


    1. A017F6T

      Disengage the 2 claws and remove the No. 1 rear bumper side support.

      Tech Tips

      Use the same procedure for the RH side and LH side.