FRONT BUMPER REMOVAL


  1. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A017F7H

      Remove the 11 clips and cool air intake duct seal.

  2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. A017D07E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille sub-assembly.

    2. A017DG7

      Remove the 6 clips.

    3. Disengage the 8 claws and 2 guides, and remove the radiator grille sub-assembly.

  3. REMOVE FRONT BUMPER ASSEMBLY


    1. A017FKEE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

    2. A017FKDE01

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A017BXG

      Remove the 8 screws and 3 clips.

    5. A017FXI

      Disengage the 5 claws and disconnect the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Disconnect each fog light connector, and then remove the front bumper assembly.