POWER BACK DOOR OPENER / CLOSER SWITCH INSPECTION


  1. INSPECT POWER BACK DOOR OPENER / CLOSER SWITCH

    A017FK1E01

    1. Measure the resistance of the switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      4 - 1 Pushed (ON) Below 1 Ω
      4 - 1 Free (OFF) 10 kΩ or higher

      If the result is not as specified, replace the switch.

    2. Check that the switch illuminates.

      Standard resistance
      Measurement Condition Specified Condition

      Battery positive (+) → 3 (ILL+)

      Battery negative (-) → 2 (ILL-)

      		 Illuminates

      If the result is not as specified, replace the switch.