Click here

BACK DOOR OPENER SWITCH INSPECTION

Click here
Click here
  1. Click here

    INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. Check operation of the opener switch.


      1. A017BTUE06

        Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Switch Position Specified Condition
        2 - 3 Back door opener switch not pushed (OFF) 10 kΩ or higher
        2 - 3 Back door opener switch pushed (ON) Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

    2. Check operation of the lock switch (w/ Smart Entry and Start System).


      1. A017FDAE01

        Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Switch Position Specified Condition
        1 - 2 Lock switch pushed (ON) Below 1 Ω
        1 - 2 Lock switch not pushed (OFF) 10 kΩ or higher

        If the result is not specified, replace the back door opener switch assembly.