BACK DOOR ON-VEHICLE INSPECTION


  1. INSPECT BACK DOOR PANEL SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A through M are within each standard range.

      A017BQLE01
      Standard clearance
      Area Measurement Area Measurement
      A 7.8 to 11.8 mm (0.307 to 0.465 in.) I 4.0 to 8.0 mm (0.158 to 0.315 in.)
      B -3.0 to 0.5 mm (-0.118 to 0.020 in.)

      J

      (for Glass Hatch Type:)

      		 2.0 to 3.5 mm (0.079 to 0.138 in.)
      C 7.8 to 11.8 mm (0.307 to 0.465 in.)

      J

      (for Fixed Glass Type:)

      		 2.5 to 3.0 mm (0.098 to 0.118 in.)
      D -3.0 to 0.5 mm (-0.118 to 0.020 in.)

      K

      (Height is 1930mm (75.984 in.) or more:)

      		 4.0 to 7.0 mm (0.158 to 0.276 in.)
      E 7.8 to 11.8 mm (0.307 to 0.465 in.)

      K

      (Height is 1930mm (75.984 in.) below:)

      		 3.5 to 6.5 mm (0.138 to 0.256 in.)
      F -3.0 to 0.5 mm (-0.118 to 0.020 in.) L 4.0 to 8.0 mm (0.158 to 0.315 in.)
      G 7.8 to 11.8 mm (0.307 to 0.465 in.) M 4.5 to 8.5 mm (0.177 to 0.335 in.)
      H -3.0 to 0.5 mm (-0.118 to 0.020 in.) - -