Click here

HOOD REASSEMBLY

Click here
Click here
  1. Click here

    CONNECT WASHER HOSE ASSEMBLY


    1. A017DSP

      Connect the washer hose assembly.

  2. Click here

    ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. A017DAXE01

      Select a washer nozzle sub-assembly so that the washer fluid spray area is as specitied.

  3. Click here

    INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A017D5X

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A017C6XE01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.

  4. Click here

    INSTALL HOOD INSULATOR


    1. A017D9J

      Install the hood insulator with the 8 clips.

  5. Click here

    INSTALL HOOD TO RADIATOR SUPPORT SEAL


    1. A017E91

      Install the hood to radiator support seal with the 8 clips.

  6. Click here

    INSPECT FRONT WASHER NOZZLE SUB-ASSEMBLY


    1. A017F0DE01

      With the engine running, check the positions that the washer fluid hits the windshield.

      Area Dimension
      A 353 mm (13.88 in.)
      B 143 mm (5.70 in.)
      C 193 mm (7.61 in.)
      OK
      Washer fluid hits the windshield in the areas shown in the illustration.
      Tip:

      If the result is not as specified, replace the washer nozzle.