HOOD DISASSEMBLY


  1. REMOVE FRONT HOOD PROTECTOR


    1. A017DN5

      Disengage the 4 claws and remove the front hood protector.

  2. REMOVE RADIATOR SEAL SUB-ASSEMBLY


    1. A017D90

      Remove the 6 clips.

    2. Disengage the 2 clips and remove the radiator seal sub-assembly.

  3. REMOVE HOOD TO RADIATOR SUPPORT SEAL


    1. A017CRL

      Remove the 8 clips and hood to radiator support seal.

  4. REMOVE HOOD INSULATOR


    1. A017FE7

      Using a clip remover, remove the 8 clips and the hood insulator.

  5. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A017FFRE01

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A017D5X

      Remove the washer nozzle sub-assembly from the washer hose.

      Note

      Washer nozzles cannot be reused.

  6. DISCONNECT WASHER HOSE ASSEMBLY


    1. A017DSP

      Disconnect the washer hose assembly.