HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A through D are within each standard range.

      A017CBXE03
      Standard clearance
      Area Measurement Area Measurement
      A 4.5 to 8.5 mm (0.1777 to 0.335 in.) C 2.5 to 5.5 mm (0.098 to 0.217 in.)
      B 4.5 to 8.5 mm (0.1777 to 0.335 in.) D -1.5 to 1.5 mm (-0.059 to 0.059 in.)