Click here

REAR NO. 1 SEAT ASSEMBLY (for LH Side) REASSEMBLY

Click here
Click here
  1. Click here

    INSTALL REAR SEAT CUSHION SPRING ASSEMBLY


    1. A017DFV

      Using a T45 "TORX" socket wrench, install the rear seat cushion spring assembly with the 4 bolts and 2 bushes.

      21 N*m 214 kgf*cm 16 ft.*lbf
  2. Click here

    INSTALL REAR SEAT HOOK


    1. A017EF6

      Engage the claw to install the rear seat hook.

  3. Click here

    INSTALL NO. 2 REAR SEAT RECLINING CONTROL CABLE


    1. A017C49

      Engage the claw.

    2. Engage the rear seat hook.

    3. Engage the 4 cable clamps to install the No. 2 rear seat reclining control cable.

  4. Click here

    INSTALL NO. 1 REAR SEAT RECLINING CONTROL CABLE (w/ Remote Folding Function)


    1. A017F9C

      Install the clamp.

    2. Engage the 2 clamps.

    3. Engage the 6 cable clamps to install the No. 1 rear seat reclining control cable.

  5. Click here

    INSTALL NO. 2 REAR SEAT COVER


    1. A017CHN

      Install the No. 2 rear seat cover.

  6. Click here

    INSTALL REAR SEAT CUSHION SIDE COVER


    1. A017BSB

      Engage the claw.

    2. Install the rear seat cushion side cover with the 2 screws.

  7. Click here

    INSTALL REAR NO. 2 SEATBACK COVER


    1. A017CZQ

      Engage the claw.

    2. Install the rear No. 2 seatback cover with the 2 screws.

  8. Click here

    INSTALL REAR NO. 1 SEAT SHOULDER BELT COVER


    1. A017C71

      Engage the guide.

    2. Engage the claw to install the rear No. 1 seat shoulder belt cover.

  9. Click here

    INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A017FMM

      Install the rear center seat outer belt assembly with the bolt and nut.

      Bolt
      7.5 N*m 77 kgf*cm 66 in.*lbf
      Nut
      42 N*m 428 kgf*cm 31 ft.*lbf
  10. Click here

    INSTALL BELT SUPPORT PLATE


    1. A017B1K

      Engage the 3 claws to install the belt support plate.

  11. Click here

    INSTALL SEPARATE TYPE REAR NO. 1 SEATBACK COVER


    1. A017E3NE01

      Using hog ring pliers, install the separate type rear No. 1 seatback cover with 10 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  12. Click here

    INSTALL REAR NO. 1 SEATBACK COVER WITH PAD


    1. A017EDK

      Engage the hooks to install the rear No. 1 seatback cover with pad.

  13. Click here

    INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH


    1. A017BKM

      Engage the 2 claws to install the rear No. 1 seat headrest support assembly RH.

  14. Click here

    INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH


    1. A017DZZ

      Engage the 2 claws to install the rear No. 1 seat headrest support assembly LH.

  15. Click here

    INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY


    1. A017CMQ

      Engage 2 guides.

    2. Engage the 2 clips.

    3. Engage the 19 claws to install the rear seatback board carpet assembly as shown in the illustration.

  16. Click here

    INSTALL REAR SEATBACK LOCK ASSEMBLY


    1. A017C24

      Install the rear seatback lock assembly with the 2 bolts.

      21 N*m 214 kgf*cm 16 ft.*lbf
  17. Click here

    INSTALL REAR SEATBACK LOWER LOCK BEZEL


    1. A017ERA

      Install the rear seatback lower lock bezel with the 2 screws.

    2. A017G0I

      Engage the snap to install the rear seat track handle as shown in the illustration.

    3. A017EYH

      Engage the 4 claws.

    4. Install the rear center seat outer belt cover with the screw.

  18. Click here

    CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A017BQ3

      Connect the rear center seat outer belt with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
  19. Click here

    INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A017E89

      Connect the rear seat lock control cable as shown in the illustration.

    2. A017FVR

      Engage the guide.

    3. Install the rear seat lock control lever sub-assembly with the 2 screws.

  20. Click here

    INSTALL REAR SEAT LOCK STRIKER COVER


    1. A017CA7

      Engage the guide.

    2. Engage the claw to install the rear seat lock striker cover.

  21. Click here

    INSTALL REAR SEATBACK COVER


    1. A017CME

      Engage the 4 claws to install the rear seatback cover.

  22. Click here

    INSTALL TONNEAU COVER HOOK HOLDER


    1. A017FDB

      Install the 2 tonneau cover hook holders with the 2 screws.

  23. Click here

    INSTALL REAR SEAT ARMREST ASSEMBLY


    1. A017FUG

      Install the rear seat armrest assembly with the bolt.

      33 N*m 337 kgf*cm 24 ft.*lbf
  24. Click here

    INSTALL NO. 1 SEAT ARMREST CAP


    1. A017EWA

      Engage the 2 claws to install the No. 1 seat armrest cap.

  25. Click here

    INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY


    1. A017FD6

      Install the rear No. 1 seat inner belt assembly with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
  26. Click here

    INSTALL REAR SEAT RECLINING INNER COVER


    1. A017CHA

      Engage the guide.

    2. Install the rear seat reclining inner cover with the screw.

  27. Click here

    INSTALL SEAT TRACK UPPER RAIL COVER


    1. A017FXT

      Engage the claw.

    2. Install the seat track upper rail cover with the screw.

  28. Click here

    INSTALL RECLINING ADJUSTER INSIDE COVER LH


    1. A017FUT

      Engage the guide to install the reclining adjuster inside cover LH.

  29. Click here

    INSTALL REAR SEAT NO. 1 RECLINING COVER


    1. A017DRP

      Engage the 2 guides.

    2. Engage the claw.

    3. Install the rear seat No. 1 reclining cover with the screw.

  30. Click here

    INSTALL NO. 1 REAR SEAT COVER (for Rear Side)


    1. A017CCH

      Engage the 2 hooks to install the No. 1 rear seat cover.

  31. Click here

    INSTALL NO. 1 REAR SEAT COVER (for RH Side)


    1. A017C6E

      Engage the 2 hooks to install the No. 1 rear seat cover.

  32. Click here

    INSTALL NO. 1 REAR SEAT COVER (for LH Side)


    1. A017F1I

      Engage the 4 hooks to install the No. 1 rear seat cover.

  33. Click here

    INSTALL SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER


    1. A017BCEE01

      Using hog ring pliers, install the separate type rear No. 1 seat cushion cover with 11 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  34. Click here

    INSTALL REAR NO. 1 SEAT CUSHION COVER WITH PAD


    1. A017FF6E01

      Using hog ring pliers, install 3 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A017BFE

      Engage the 12 hooks.

    3. A017C03

      Engage the 3 buttons.

    4. A017D88E01

      Using hog ring pliers, install 2 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    5. Install the 2 hooks.

    6. A017EM7

      Engage the 2 hooks to install the rear No. 1 seat cushion cover with pad.

  35. Click here

    INSTALL REAR SEAT FRONT CUSHION MOULDING


    1. A017CNU

      Install the rear seat front cushion moulding with the screw.

  36. Click here

    INSTALL REAR SEAT LOCK ASSEMBLY


    1. A017EUY

      Install the rear seat lock assembly with the 2 bolts.

      21 N*m 214 kgf*cm 16 ft.*lbf
  37. Click here

    INSTALL NO. 2 REAR SEAT BEZEL COVER


    1. A017CMU

      Temporarily install the No. 2 rear seat bezel cover as shown in the illustration.

    2. Engage the 2 guides.

    3. Install the rear seat bezel cover with the screw.

  38. Click here

    INSTALL REAR SEAT CUSHION UNDER COVER


    1. A017F4H

      Engage the guide.

    2. Engage the claw to install the rear seat cushion under cover.

  39. Click here

    INSTALL REAR SEAT 3 POINT TYPE COVER ASSEMBLY


    1. A017DI2

      Engage the 2 claws to install the rear seat 3 point type cover assembly.

  40. Click here

    INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY


    1. A017B8D

      Install the rear side seat band sub-assembly.

  41. Click here

    INSTALL NO. 2 SEAT LEG COVER


    1. A017DKB

      Install the No. 2 seat leg cover with the 5 screws.

  42. Click here

    INSTALL REAR SEAT NO. 2 LEG SIDE COVER


    1. A017F2H

      Engage the 2 claws to install the rear seat No. 2 leg side cover.

  43. Click here

    INSTALL CENTER PROTECTOR COVER


    1. A017DRX

      Temporarily install the center protector cover.

    2. install the rear side seat band sub-assembly with the screw.

    3. A017ETV

      Engage the claw and guide.

    4. Install the center protector cover with the screw.

  44. Click here

    INSTALL SEAT ADJUSTER COVER CAP


    1. A017FSB

      Engage the 2 claws to install the seat adjuster cover cap.

  45. Click here

    INSTALL SEAT ADJUSTER COVER CAP


    1. A017F13

      Engage the 2 claws to install the seat adjuster cover cap.

  46. Click here

    INSTALL REAR SEAT CUSHION MOULDING RH


    1. A017G3Y

      Engage the 6 claws.

    2. Install the rear seat cushion moulding RH with the screw.

  47. Click here

    INSTALL SEAT ADJUSTER COVER CAP


    1. A017FN8

      Engage the 2 claws to install the seat adjuster cover cap.

  48. Click here

    INSTALL REAR SEAT CUSHION MOULDING LH


    1. A017E0R

      Engage the guide.

    2. Engage the 5 claws.

    3. Install the rear seat cushion moulding LH with the screw.

  49. Click here

    INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    1. A017E4D

      Install the No. 1 reclining adjuster release handle with the 3 screws.

  50. Click here

    INSTALL REAR SEAT RECLINING UPPER COVER


    1. A017ERD

      Engage the 3 claws to install the rear seat reclining upper cover.