FRONT SEAT ASSEMBLY (for Power Seat) INSTALLATION

INSTALL FRONT SEAT ASSEMBLY
1. Place the front seat assembly in the cabin.
  
  Note
  
  Be careful not to damage the vehicle body.
2. Connect the connectors under the seat.
3. Connect the cable to the negative (-) battery terminal.
  
  Note
  
  When reconnected the cable, some systems need to be initialized Click here.
4. Temporarily install the front seat assembly with the 4 bolts.
5. Operate the power seat switch knob and move the seat to the rearmost position.
6. Tighten the 2 bolts on the front side of the seat.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
  
  Tech Tips
  
  Tighten the bolts in the order indicated in the illustration.
7. Operate the power seat switch knob and move the seat to the foremost position.
8. Tighten the 2 bolts on the rear side of the seat.
  
  Torque:
  
  37 N*m { 377 kgf*cm, 27 ft.*lbf }
  
  Tech Tips
  
  Tighten the bolts in the order indicated in the illustration.
INSTALL REAR INNER SEAT TRACK COVER
1. Engage the 2 claws and install the rear inner seat track cover.
INSTALL REAR OUTER SEAT TRACK COVER
1. Engage the 2 claws and install the rear outer seat track cover.
INSTALL FRONT INNER SEAT TRACK COVER
1. Operate the power seat switch knob and move the seat to the rearmost position.
2. Engage the 2 claws and install the front inner seat track cover.
INSTALL FRONT OUTER SEAT TRACK COVER
1. Engage the 2 claws and install the front outer seat track cover.
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSPECT FRONT SEAT ASSEMBLY
1. Inspect the power seat operation.
2. w/ Seat Heater System:
  
  Check the seat heater operation.
  1. Turn the ignition switch on (IG).
  2. Turn the seat heater switch on.
  3. Wait 5 minutes or more and confirm that the seat surface becomes warm.
INSPECT SRS WARNING LIGHT

Click here