FRONT SEAT ASSEMBLY (for Power Seat) DISASSEMBLY


  1. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A017EZ7E01

      Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the reclining power seat switch knob.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A017BAQE01

      Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the slide and vertical power seat switch knob.

  3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A017CMM

      Disengage the hooks.

    2. A017EGR

      Remove the 5 screws.

    3. Disengage the claw.

    4. Disengage the guide and remove the front seat cushion shield assembly.

    5. w/o Seat Cushion Front Edge Adjustment Function:

      Disconnect the connector from the front power seat lumbar switch.

    6. w/ Seat Cushion Front Edge Adjustment Function:


      1. Disconnect the connector from the front power seat lumbar switch and the seat variable cushion switch.

      2. Disengage each clamp.

  4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A017EJL

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the front inner No. 1 seat cushion shield.

  5. REMOVE FRONT POWER SEAT LUMBAR SWITCH


    1. A017F86

      Remove the 2 screws and the front power seat lumbar switch.

  6. REMOVE SEAT VARIABLE CUSHION SWITCH (w/ Seat Cushion Front Edge Adjustment Function)


    1. A017CIZ

      Remove the 2 screws and the seat variable cushion switch.

  7. REMOVE POWER SEAT SWITCH


    1. A017B3Z

      Remove the 3 screws.

    2. Disconnect the connector and remove the power seat switch.

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector and clamp.

    2. A017FR3

      Remove the nut and the front seat inner belt assembly.

  9. REMOVE FRONT SEAT CUSHION INNER SHIELD


    1. A017F7D

      Remove the screw.

    2. Disengage the claw.

    3. A017FUH

      Disengage the guide and remove the front seat cushion inner shield as shown in the illustration.

  10. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. A017CHB

      Disengage the hooks.

    2. Disengage the 2 clamps.

    3. A017FMW

      for Front Passenger Side:

      w/ Occupant Classification System:

      Disconnect the occupant detection sensor connector as shown in the illustration.

    4. w/ Seat Heater System:


      1. Disengage each clamp of the seat heater wire harness.

      2. Disconnect the seat heater connector.

    5. Using a clip remover, remove the 2 clips.

      A017FA4

    6. Disengage the hooks and remove the front seat cushion cover with pad as shown in the illustration.

  11. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A017D6P

      Disengage the 4 clamps.

    2. Disengage the hooks.

    3. Disconnect the 2 connectors.

    4. Using a clip remover, remove the 2 clips.

      A017CU3

    5. Disengage the hooks as shown in the illustration.

    6. A017CCO

      Disengage the hook as shown in the illustration.

    7. A017EE1

      Remove the 4 hog rings and the front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Seat Cushion Front Edge Adjustment Function)


    1. A017EKJ

      Remove the 6 hog rings.

    2. A017DIX

      Remove the 11 hog rings and the separate type front seat cushion cover.

  13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Seat Cushion Front Edge Adjustment Function)


    1. A017EIA

      Remove the 2 hog rings.

    2. A017BVC

      Remove the 15 hog rings and the separate type front seat cushion cover.

  14. REMOVE FRONT SEATBACK COVER WITH PAD


    1. A017BS7

      Remove the 3 hog rings.

    2. A017E3M

      Remove the 5 hog rings.

    3. A017G5S

      Disengage the 2 hooks.

    4. A017C9W

      Turn back the separate type front seatback cover to remove the nut, and separate the bracket of the separate type front seatback cover.

    5. A017DQF

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. Remove the separate type front seatback cover with pad from the front seat frame assembly with adjuster.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A017CZA

      Remove the 7 hog rings and the separate type front seatback cover.

  16. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A017BK4

      Disconnect the connector.

    2. Remove the 2 screws and the lumbar support adjuster assembly.

    3. A017DUZ

      Remove the bush.

  17. REMOVE LUMBAR SUPPORT MOTOR ASSEMBLY


    1. A017BY2

      Remove the 4 screws and the lumbar support motor assembly.

  18. REMOVE ACTIVE HEADREST UPPER UNIT


    1. A017CF7

      Remove the nut and disconnect the cable from the active headrest upper unit as shown in the illustration.

    2. Remove the 4 nuts and the active headrest upper unit.

  19. REMOVE ACTIVE HEADREST LOWER UNIT


    1. A017B97

      Remove the 4 nuts and the active headrest lower unit.

  20. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A017DMCE01

      Remove the screw.

    2. Disengage the clamp.

    3. Disengage the guide and remove the reclining adjuster inside cover LH.

  21. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A017FJY

      Remove the screw and the reclining adjuster inside cover LH.

  22. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. A017CC5E01

      Remove the screw.

    2. Disengage the clamp.

    3. Disengage the guide and remove the reclining adjuster inside cover RH.

  23. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    A017E4M

    Remove the screw and the reclining adjuster inside cover RH.

  24. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A017ETG

      Disengage the 2 clamps and separate the airbag wire harness.

    2. Remove the 2 nuts and front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.

  25. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. A017EXPE01

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the guide and remove the front seat lower cushion shield LH .

  26. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. A017FENE01

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the guide and remove the front seat lower cushion shield RH.

  27. REMOVE FRONT SEAT WIRE (w/o Seat Cushion Front Edge Adjustment Function)


    1. A017FX0

      Disengage the 2 clamps.

    2. Disconnect the connector.

    3. w/o Seat Heater System:


      1. A017DJL

        Disengage the 4 clamps.

      2. Disengage the 2 claws.

      3. Disconnect the 4 connectors and remove the front seat wire.

    4. w/ Seat Heater System:


      1. A017F9Q

        Disengage the 4 clamps.

      2. Disengage the 2 claws.

      3. Disconnect the 5 connectors and remove the front seat wire.

  28. REMOVE FRONT SEAT WIRE (w/ Seat Cushion Front Edge Adjustment Function)


    1. A017FX0

      Disengage the 2 clamps.

    2. Disconnect the connector.

    3. w/o Seat Heater System:


      1. A017BEY

        Disengage the 4 clamps.

      2. Disengage the 2 claws.

      3. Disconnect the 5 connectors and remove the front seat wire.

    4. w/ Seat Heater System:


      1. A017G7E

        Disengage the 4 clamps.

      2. Disengage the 2 claws.

      3. Disconnect the 6 connectors and remove the front seat wire.

  29. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A017CX1

      Disengage the 2 clamps and remove the seat heater control sub-assembly.

  30. REMOVE SEAT POSITION SENSOR


    1. A017BHS

      Disconnect the connector.

    2. Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.

    3. A017BB3

      Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.