Click here

FRONT SEAT ASSEMBLY (for Power Seat) REMOVAL

Click here
Click here
  1. Click here

    REMOVE FRONT SEAT HEADREST ASSEMBLY

  2. Click here

    REMOVE FRONT OUTER SEAT TRACK COVER


    1. Operate the power seat switch knob and move the seat to the rearmost position.

    2. A017ET7

      Disengage the 2 claws and remove the front outer seat track cover.

  3. Click here

    REMOVE FRONT INNER SEAT TRACK COVER


    1. A017F34

      Disengage the 2 claws and remove the front inner seat track cover.

  4. Click here

    REMOVE REAR OUTER SEAT TRACK COVER


    1. Operate the power seat switch knob and move the seat to the foremost position.

    2. A017DLU

      Disengage the 2 claws and remove the rear outer seat track cover.

  5. Click here

    REMOVE REAR INNER SEAT TRACK COVER


    1. A017DBE

      Disengage the 2 claws and remove the rear inner seat track cover.

  6. Click here

    REMOVE FRONT SEAT ASSEMBLY


    1. A017B0K

      Remove the 2 bolts on the rear side of the seat.

    2. Operate the power seat switch knob and move the seat to the rearmost position.

    3. A017FKL

      Remove the 2 bolts on the front side of the seat.

    4. Operate the power seat switch knob and move the seat to the center position. Also, Operate the power seat switch knob and move the seatback to the upright position.

    5. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).

      • If the side airbag was deployed, replace the front seat assembly with a new one.

      Note:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

    6. Disconnect each connector under the front seat assembly.

    7. Remove the front seat assembly.

      Note:

      Be careful not to damage the vehicle body.