FRONT SEAT ASSEMBLY (for Manual Seat) INSTALLATION


  1. INSTALL FRONT SEAT ASSEMBLY


    1. Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Connect the connectors under the seat.

    3. Temporarily install the front seat assembly with the 4 bolts.

    4. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    5. A017D8FE01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    6. Lift up the seat track adjusting handle and move the seat to the foremost position.

    7. A017G32E01

      Tighten the 2 bolts on the rear side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

  2. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK


    1. During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously.

      If the seat adjusters do not lock simultaneously, loosen the bolts securing the seat to adjust the adjuster position.

  3. INSTALL REAR SEAT TRACK COVER


    1. A017CWY

      Engage the 4 claws and install the 2 rear seat track covers.

  4. INSTALL FRONT INNER SEAT TRACK COVER


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. A017DLZ

      Engage the 2 claws and install the front inner seat track cover.

  5. INSTALL FRONT OUTER SEAT TRACK COVER


    1. A017FOO

      Engage the 2 claws and install the front outer seat track cover.

  6. INSTALL FRONT SEAT HEADREST ASSEMBLY

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

    Note

    When reconnected the cable, some systems need to be initialized Click here.

  8. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)

    Click here