Click here

POWER SEAT SWITCH INSTALLATION

Click here
Click here
  1. Click here

    INSTALL FRONT POWER SEAT SWITCH


    1. A017B3Z

      Install the power seat switch with the 3 screws.

    2. Connect the connector.

  2. Click here

    INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. w/o Seat Cushion Front Edge Adjustment Function:

      Connect the connector to the front power seat lumbar switch.

    2. w/ Seat Cushion Front Edge Adjustment Function:


      1. Engage the each clamps.

      2. Connect the connector to the front power seat lumbar switch and the seat variable cushion switch.

    3. A017EGR

      Engage the guide and the claw.

    4. Install the front seat cushion shield assembly with the 5 screws.

    5. A017CMM

      Engage the hooks.

  3. Click here

    INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A017BU4

      Engage the 4 claws and install the slide and vertical power seat switch knob.

  4. Click here

    INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A017D30

      Engage the 2 claws and install the reclining power seat switch knob.

  5. Click here

    INSTALL FRONT SEAT ASSEMBLY


    1. Place the front seat assembly in the cabin.

      Note:

      Be careful not to damage the vehicle body.

    2. Connect the connectors under the seat.

    3. Connect the cable to the negative (-) battery terminal.

      Note:

      When reconnected the cable, some systems need to be initialized (Click here).

    4. Temporarily install the front seat assembly with the 4 bolts.

    5. Operate the power seat switch knob and move the seat to the rearmost position.

    6. A017FKLE01

      Tighten the 2 bolts on the front side of the seat.

      37 N*m 377 kgf*cm 27 ft.*lbf
      Tip:

      Tighten the bolts in the order indicated in the illustration.

    7. Operate the power seat switch knob and move the seat to the foremost position.

    8. A017B0KE01

      Tighten the 2 bolts on the rear side of the seat.

      37 N*m 377 kgf*cm 27 ft.*lbf
      Tip:

      Tighten the bolts in the order indicated in the illustration.

  6. Click here

    INSTALL REAR INNER SEAT TRACK COVER


    1. A017DBE

      Engage the 2 claws and install the rear inner seat track cover.

  7. Click here

    INSTALL REAR OUTER SEAT TRACK COVER


    1. A017DLU

      Engage the 2 claws and install the rear outer seat track cover.

  8. Click here

    INSTALL FRONT INNER SEAT TRACK COVER


    1. Operate the power seat switch knob and move the seat to the rearmost position.

    2. A017F34

      Engage the 2 claws and install the front inner seat track cover.

  9. Click here

    INSTALL FRONT OUTER SEAT TRACK COVER


    1. A017ET7

      Engage the 2 claws and install the front outer seat track cover.

  10. Click here

    INSTALL FRONT SEAT HEADREST ASSEMBLY

  11. Click here

    INSPECT FRONT SEAT ASSEMBLY


    1. Inspect the power seat operation.

    2. w/ Seat Heater System:

      Check the seat heater operation.


      1. Turn the ignition switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

  12. Click here

    INSPECT SRS WARNING LIGHT

    (Click here)