FRONT SEAT ASSEMBLY (for Manual Seat) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

    CAUTION:


    • Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Click here.

    • If the side airbag was deployed, replace the front seat assembly with a new one.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY

  3. REMOVE FRONT OUTER SEAT TRACK COVER


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. A017FOO

      Disengage the 2 claws and remove the front outer seat track cover.

  4. REMOVE FRONT INNER SEAT TRACK COVER


    1. A017DLZ

      Disengage the 2 claws and remove the front inner seat track cover.

  5. REMOVE REAR SEAT TRACK COVER


    1. Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. A017CWY

      Disengage the 4 claws and remove the 2 rear seat track covers.

  6. REMOVE FRONT SEAT ASSEMBLY


    1. A017G32

      Remove the 2 bolts on the rear side of the seat.

    2. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    3. A017D8F

      Remove the 2 bolts on the front side of the seat.

    4. Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

    5. Disconnect the connectors under the front seat assembly.

    6. Remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.