REAR NO. 2 SEAT ASSEMBLY INSTALLATION


  1. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Install the 6 bolts on the rear of the seat.

      A017CU1
      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Install the rear No. 2 seat assembly with the bolt.

      A017E17
      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. A017BX8E01

      Engage the 2 claws <B>.

    2. Engage the 2 claws <A> to install the center seat cushion cover sub-assembly.

  3. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH


    1. A017DK9E01
      Text in Illustration
      *1 Rubber Band

      Route the rear No. 2 seat outer belt assembly LH through the rubber band as shown in the illustration.

    2. Install the rear No. 2 seat outer belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      After installing the belt, check that it is not twisted.

  5. INSTALL DECK FLOOR BOARD ASSEMBLY


    1. A017FYN

      Install the rear deck floor board assembly with the 4 nuts and 4 bolts.

  6. INSTALL REAR MAT


    1. A017F51

      Install the rear mat.

  7. INSTALL DECK SIDE TRIM BOX RH


    1. Install the deck side trim box RH as shown in the illustration.

      A017EFK
    2. A017FOPE01

      Install the 2 deck side trim clips and clip.

  8. INSTALL JACK CARRIER ASSEMBLY (for LHD)


    1. A017FWH

      Engage the 3 claws, and install the jack carrier assembly.

  9. INSTALL JACK CARRIER ASSEMBLY (for RHD)


    1. A017G4W

      Engage the 3 claws, and install the jack carrier assembly.

  10. INSTALL JACK ASSEMBLY (for LHD)


    1. A017EKS

      Install the jack assembly.

  11. INSTALL JACK ASSEMBLY (for RHD)


    1. A017DSX

      Install the jack assembly.

  12. INSTALL JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Install the jack carrier cushion.

  13. INSTALL JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Install the jack carrier cushion.

  14. INSTALL JACK CARRIER SUPPORT

  15. INSTALL REAR SEAT SIDE COVER RH


    1. A017EH1

      Engage the 2 clips and install the rear seat side cover RH.

  16. INSTALL DECK SIDE TRIM BOX LH


    1. Install the deck side trim box LH as shown in the illustration.

      A017CIY
    2. A017BZVE01

      Install the 2 deck side trim clips and clip.

  17. INSTALL REAR SEAT SIDE COVER LH


    1. A017BBU

      Engage the 2 clips and install the rear seat side cover LH.

  18. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Engage the 2 guides and install the No. 2 deck board sub-assembly.

  20. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Engage the 2 guides and install the No. 3 deck board sub-assembly.

  21. INSTALL DECK BOARD ASSEMBLY


    1. A017CPI

      Install the deck board assembly.