Click here

BACK WINDOW LOCK INSPECTION

Click here
Click here
  1. Click here

    INSPECT BACK WINDOW LOCK ASSEMBLY


    1. A017FAOE01

      Check operation of the back window lock assembly.


      1. Move the back window lock assembly to the lock position.

      2. Apply the battery voltage to the window lock motor and check the operation of the window lock motor.

        Table 1. OK:
        Measurement Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 Unlock

        If the result is not as specified, replace the back window lock assembly.

    2. A017FAOE01

      Check operation of the back window courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Condition Specified Condition
        1 - 2 Lock 10 kΩ or higher
        1 - 2 Unlock Below 1 Ω

        If the result is not as specified, replace the back window lock assembly.