DEFOGGER RELAY ON-VEHICLE INSPECTION


  1. INSPECT DEFOGGER RELAY (Marking: RR DEF)


    1. Remove the defogger relay from the engine room relay block.

    2. A017CVTE01

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      3 - 4 Voltage is not applied between terminals 1 and 2 Below 1 Ω
      3 - 4 Apply battery voltage between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Apply battery voltage between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the defogger relay.