CLOCK (w/o Multi-information Display) INSTALLATION


  1. INSTALL CLOCK ASSEMBLY

  2. INSTALL NO. 2 RADIO BRACKET


    1. A017BHI

      Install the No. 2 radio bracket with the 4 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. A017E7U

      Install the No. 1 radio bracket with the 4 screws.

    2. A017GBL

      Engage the claw and install the connector.

  4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect each connector.

    2. A017EFV

      Engage the 4 clips.

    3. A017FXP

      Install the radio receiver assembly with bracket with the 4 bolts.

  5. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY


    1. Connect the connector.

    2. A017G04

      Engage the 4 clips and install the heater control and accessory assembly.

  6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A017EYQE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A017DC8

      Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.